Switch-Over Weighing Unit (Only Not Verifiable Models) - Kern&Sohn Sfb Betriebsanleitung

7.5 Switch-over weighing unit (only not verifiable models)

How to enable weighing units:
 Call-up menu item P5 Unt, see chap. 8
 Press
and the first weighing unit with the current setting
will be displayed.
 To enable [on] / disable [off] the displayed weighing unit,
press .
 Acknowledge with
will be displayed.
 To enable [off] / disable [on] the displayed weighing unit,
press .
 Acknowledge with
 Repeat sequence for each weighing unit.
Note: „tj" and „Hj" cannot be activated at the same time, only
either ... or ... .
 Return to weighing mode using
Switch-over weighing unit:
 Keep
pressed, the display changes over to the
weighing units activated before (e.g. kg  lb)
SFB-BA-e-1625
. The next unit with the current setting
.


29