Electrical Warnings - Whirlpool WRD 6030 B Bedienungsanleitung

unpack and install - risk of cuts.
Installation, including water supply (if any), electrical
connections and repairs must be carried out by a qualified
technician. Do not repair or replace any part of the appliance
unless specifically stated in the user manual. Keep children
away from the installation site. After unpacking the
appliance, make sure that it has not been damaged during
transport. In the event of problems, contact the dealer or
your nearest After-sales Service. Once installed, packaging
waste (plastic, styrofoam parts etc.) must be stored out
of reach of children - risk of suffocation. The appliance
must be disconnected from the power supply before
any installation operation - risk of electric shock. During
installation, make sure the appliance does not damage the
power cable - risk of fire or electric shock. Only activate
the appliance when the installation has been completed.
Carry out all cabinet cutting operations before fitting
the appliance and remove all wood chips and sawdust.
If the appliance is not installed above an oven, a separator
panel (not included) must be installed in the compartment
under the appliance.

ELECTRICAL WARNINGS

It must be possible to disconnect the appliance from
the power supply by unplugging it if plug is accessible, or
by a multi-pole switch installed upstream of the socket in
accordance with the wiring rules and the appliance must
5