Getting Started - Parrot MKi9200 Bedienungsanleitung

Once you have stuck the support on the dashboard,
wait for approximately 2 hours to make sure the
adhesive tape adheres well.
Installing the microphone
• Make sure the microphone is installed as close to the
mouth of the user as possible. The ideal distance is 60 cm.
The best possible location for the microphone is near the
rear-view mirror.
• The microphone needs to be pointed towards the user.
Installing the screen
Install the screen in an easily accessible and visible location.
Do not install the screen in the airbag deployment area or in
a possible head impact area.
Once you have stuck the support on the dashboard,
wait for approximately 2 hours to make sure the
adhesive tape adheres well.
16
All manuals and user guides at all-guides.com
► Diagrams p.12.

Getting started

Associating the control unit with the remote control
If the remote control doesn't seem to be associated to the
electronic box while using the Parrot MKi9200 for the first
time, press several times the red button while holding down
the Play and green buttons until the «Pairing remote control»
message is said. This has to be done during a 30 seconds
period once the ignition is turned on.
Selecting the language
While using the Parrot MKi9200 for the first time, use the jog
wheel to browse through the available languages and press
the jog wheel to confirm your selection.
Navigating through the menus
• Press the central jog wheel to access the menus.
> The kit says the name of the current menu.
• Browse through the menus by turning the wheel and
confirm with the green button or by pressing the wheel.
• Press the red button or wait a few seconds to exit the menu.