Rml 9331 Model; Electrical Operation; Gas Operation; Setting Of Cooling Compartment Temperature - Dometic Rml 9331 Bedienungsanleitung

4.7 RML 9331 models
MES appliances (manual energy selection)

4.7.1 Electrical operation

1
2
To start the refrigerator, press button (1) for 2
seconds.
The refrigerator starts with the last selected
type of energy.
230V operation :
Press button (2) :
12V operation :
Press button (4) :

4.7.2 Gas operation

1
Gas operation :
Press button (3) :
The ignition process is activated automatical-
ly by means of an automatic igniter.
i
The flame extinguishes after reaching the pre-
set cooling compartment temperature and
ignites again if the cooling compartment tem-
perature increases again. If the flame is not lit
after the first ignition attempt, the automatic
igniter repeats the ignition twice (duration 30 s)
at time intervals of 2 minutes. If the flame is
not lit afterwards, a fault is indicated.
4
Fig. 14
3
Fig. 15
4.7.3 Setting of cooling compartment
temperature
Select the desired cooling compartment tem-
perature by pressing button (6) .
The LED display (7) of the selected temperatu-
re setting is illuminated.
The scale starts with MIN position at the left
LED position (small bar = highest temperature)
and climbs up to MAX position at the right
LED position (large bar = lowest temperature).
Note: The temperature levels do not relate to
absolute temperature values.
4.8 RML 9335 models
AES appliances
(manual + automatic energy selection)

4.8.1 Manual operation

1
To start the refrigerator, press button (1) for 2
seconds.
The refrigerator starts with the last selected
type of energy.
230V operation :
Press button (2) :
12V operation :
Press button (4) :
Gas operation :
Press button (3) :
17
Refrigerator operation
6 7
2
3 4
Fig. 16
Fig. 17