Technical Data; Rating Plate - JUNO JKSI603F9 Benutzerinformation

Problem
comes on.
The outer ring is not activated.
and a number come on.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Give also three digit letter code for the
glass ceramic (it is in the corner of the glass
surface) and an error message that comes

9. TECHNICAL DATA

9.1 Rating plate

Model JKSI603F9
Typ 61 B3A 02 AA
Induction 7.35 kW
Ser.Nr. .................
JUNO
9.2 Cooking zones specification
Cooking zone
Left front
Left rear
Possible cause
There is no cookware on the
zone.
The cookware is unsuitable.
The diameter of the bottom of the
cookware is too small for the
zone.
The diameter of the bottom of the
cookware is too small.
There is an error in the hob.
Nominal power PowerBoost [W]
(maximum heat
setting) [W]
2300 3200
2300 3200
Remedy
Put cookware on the zone.
Use cookware suitable for induction
hobs. Refer to "Hints and tips".
Use cookware with correct dimen‐
sions. Refer to "Technical data".
Use cookware with a bigger bottom
diameter.
Deactivate the hob and activate it
again after 30 seconds. If
comes on again, disconnect the hob
from the electrical supply. After 30
seconds, connect the hob again. If
the problem continues, speak to an
Authorised Service Centre.
on. Make sure, you operated the hob
correctly. If not the servicing by a service
technician or dealer will not be free of charge,
also during the warranty period. The
information about guarantee period and
Authorised Service Centres are in the
guarantee booklet.
PNC 949 594 482 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in: Germany
7.35 kW
PowerBoost
maximum du‐
ration [min]
10
10
Cookware di‐
ameter [mm]
125 - 210
125 - 210
ENGLISH 17