Sony VCL-0716BXA Bedienungsanleitung Seite 20

Location and Function of Parts
1 I (iris)/ Z (zoom)/ F (focus) M/A (manual/auto)
switches
The iris (I), zoom (Z) and focus (F) switches are factory-set
to A so that you operate the lens on the RM-C950 remote
control unit (not supplied).
When you do not use the RM-C950, the lens adjusts the iris
automatically. Set Z and F to M and adjust manually.
When you adjust the iris, zoom and focus manually, remove
the cover and set the switches to M with a pointing object.
2 Lens hood
Focus
3 Focus ring
When you focus manually, set the F switch 1 to M and turn
this ring to focus in the subject.
Zoom
4 Zoom ring
When you zoom manually, set the Z switch 1 to M and
turn this ring to zoom in or out.
Iris
5 Iris ring
When you adjust iris manually, set the I switch 1 to M and
turn this ring to obtain a proper iris.
20
Macro
6 MACRO ring and knob
When you take a close-up picture, while pressing the knob
toward the video camera and turn the MACRO ring in the
direction of the arrow.
Lens mount
7 Lens mount pin
8 Lens mount
Flange focal length adjustment
9 Ff (flange focal length) adjustment ring
Turn the ring to adjust the flange focal length. For the
operation, see page 21.
0 Ff adjustment ring screw
To turn the Ff adjustment ring, turn the screw
counterclockwise to loosen. To tighten the Ff adjustment
ring, turn fully clockwise.