Proper Levelling - Wolkenstein WGSP14-6DW Bedienungsanleitung

NOTICE! After removing the worktop, the previously loosened screws
must be tightened again.

2.9 Proper levelling

 The appliance must stand in a stable and level position to ensure proper
operation. The supporting feet must stand firmly on the ground so that the
appliance does not wobble. Adjust the supporting feet accordingly. The firm
contact of the supporting feet with the ground also ensures that the appliance
does not vibrate or move unintentionally.
 The dishwasher must also be levelled horizontally so that the dish racks operate
properly and the cleaning efficiency is guaranteed.
 The maximum permissible inclination angle under the entire appliance is 2°.
Adjust the appliance with its supporting feet horizontally. Check with a spirit
level.
1. The appliance must stand in a stable and level position to ensure proper
operation.
2. Place a spirit level on the slide-in rail inside the appliance and on the inside of the
appliance door to check if the appliance is level.
3. If necessary, level the appliance by adjusting the supporting feet individually.
H
OW TO LEVEL THE APPLIANCE PROPERLY
~ ~
96