Electrical Connection - Wolkenstein WGSP14-6DW Bedienungsanleitung

4. Fix the water drain hose properly, using a clamp (s. fig. below).
When installed to a fixed drain the water drain hose must be connected properly
to avoid any leaks.
When the sink is higher than 1000 mm the excess water cannot be drained
directly. Drain excess water in a suitable container which is held outside and lower
than the sink.
If the length of the water drain hose is not sufficient, apply to your authorised
service for an extension made from the same material as the original water drain
hose. The length of the water drain hose (including extension) should not
exceed 4 metres; otherwise, the performance of the appliance will be reduced.
If the water drain hose is longer than 4 metres the dishes will not be cleaned
properly. Check that the connection does not leak. Fix the outlet hose with a
hose-holder.
NOTICE! After the installation of the water supply and wastewater disposal
as well as before the first operation, all water hose connections – even on
the appliance itself – must be checked for leakage. The manufacturer is
not liable for any damage caused by improper installation.

2.7 Electrical connection

DANGER! Do not modify the plug provided with the appliance, if it will
not fit the outlet, have a proper outlet installed by a qualified electrician
(not covered by the guarantee).
WARNING! Do not use any extension cords, multiple sockets or
adapters. RISK OF FIRE!
~ ~
93