ecofort ecoQ DryAir 20L Complete Gebrauchsanweisung Seite 88

Wi-Fi Connection
Information on the ecofort SMART App
This application allows you to operate the unit via your home network.
A prerequisite is a permanent Wi-Fi connection to your router and the
"ecofort SMART" app.
The "ecofort SMART" app is available for free on Android and iOS. Scan
the QR code to get directly to the download.
Wi-Fi Connection
In order to be able to connect your device, the "ecofort SMART" app
has to be installed on your smartphone or tablet and a user account
must be created (follow the instructions in the app).
Your smartphone or tablet must have an active Wi-Fi connection to
the local network where the dehumidifier will be used in.
Automatic Connection
Bluetooth has to be activated on your smartphone or tablet during the
connection process.
1. Turn on device
2. Open the "ecofort SMART" app
Select "Add Device", available devices will be shown
3.
Press "Add", your device will automatically be added
4.
Manual Connection
If your device is not automatically detected, find it in the "Add Manually" section below.
Select "Dehumidifier" and then your particular model. Follow the instructions as given
within the application.
Note: Once the unit has been successfully connected, the Wi-Fi lamp on the unit stays lit
You can now operate the unit from anywhere by using the app.
Disconnection
Press and hold the Fan Speed button for about 5 seconds to disconnect the unit, the Wi-Fi
indicator lamp will go off. The device can also be disconnected within the app, by deleting
the corresponding device.
Note: If a different user connects to the device, the existing connection will be disrupted
and the device deleted.
86 | Instruction Manual ecoQ DryAir 20L & 25L Complete