Binding The Drone; Gps Mode Switch - Modster BLIZZARD GPS Bedienungsanleitung

Manual

11. binding the drone

1. Put the battery of the aircraft into the battery slot of the aircraft in the
correct direction, place the aircraft on a level ground, first press the bat-
tery switch briefly, then press and hold the battery switch for 5 seconds,
the aircraft light flashes slowly, indicating that the power-on is success-
ful.
2. Turn on the power of the remote control, hear a beep and the power
indicator of the remote control is always on. The code is completed.

12. GPS Mode Switch

Note: The product is powered on by default GPS mode (MODE2). In the
case of less than 8 satellites, the drone can only unlock the motor but
cannot take off. If you want to take off, you need to switch the optical flow
mode before the satellite positioning is completed. Press and hold the GPS
button for 5 seconds (the switching method is shown on the right), after the
switch is successful, the remote control will make a beep, and the drone
will not have all GPS-related functions at this time. Pay attention to the flight
height and distance to avoid losing the drone!
30
switch
MODSTER Blizzard GPS
switch
www.modster.at