Manual
Note: The best distance is 1 meter above the ground during calibration
•
Do not calibrate in areas with strong magnetic fields, such as magnetic
mines, parking lots, construction areas with underground steel bars, etc.
•
During calibration, do not carry ferromagnetic substances, such as keys,
mobile phones, etc. with you.
•
Do not calibrate near large pieces of metal.
14. Gyro Calibration
After the code is successfully matched, place the aircraft on the level
ground, press and hold for five seconds as shown in the figure below, and
the remote control emits a „beep" sound. At this time, the front and rear
indicators flash rapidly, the gyroscope enters the calibration state, and the
indicator changes from fast flashing to When it is on, calibration is comple-
te.
Note: When calibrating the gyroscope, be sure to place the air-
craft on a level surface, otherwise the flight will be affected.
www.modster.at
MODSTER Blizzard GPS
33