Charging The Battery; Replace Propeller - Modster Mini Blizzard Pro Betriebsanleitung

Manual

Charging the battery

Take the USB charging cable out of the package & insert the Micro USB plug into the designated
socket on the battery. Then connect the charging cable to a suitable USB socket (computer socket, mains
adapter, power bank). During the charging process, the LED on the red lights up. After the end of the
charging process, the LED goes out & the battery is fully charged. (duration approx. 100 minutes)
Battery safety instructions:
• Old and new ones must not be used together.
• Do not charge non-rechargeable batteries.
• Only use the enclosed charger!
• Insert the batteries correctly. Pay attention to polarity.
• Do not short-circuit batteries or rechargeable batteries!
• Only charge rechargeable batteries under adult supervision!
• Never charge batteries unsupervised!
• Charge batteries only on fireproof surfaces and far away from flammable materials.
• Do not overcharge. Dispose of batteries according to the regulations.
• Do not dispose of batteries or rechargeable batteries in a fire.

Replace propeller

Rotor blade B
WIFI Camera
1. Propellers to be replaced must always be mounted in the correct position. Propellers marked A must
be mounted at position A; propellers marked B must be mounted at position B.
2. In flight, propellers A rotate clockwise, propellers B counterclockwise.
www.modster.at
Switch
Rotor blade A
Mini Blizzard Pro
Motor
21