Maintenance And Servicing; Maintenance And Cleaning - Bosch Kiox 300 Originalbetriebsanleitung

English – 4
The following settings can be changed via the quick menu:
– <Reset trip>
All data on the journey so far is reset to zero.
– <eShift> (optional)
The settings vary depending on the gearing in question.
Note: Other functions may be available depending on your
eBike equipment.
Start page
If you did not select another screen before the last time you
switched off, you will be shown this screen.
80%
eMTB
SPEED
22
a State of charge of eBike battery (variable)
Assistance level
b
c Bicycle lights
Unit of speed indicator
i
j Indicator name
k Your performance
l Speed
m Drive power
n Navigation bar
The indicators a to c form the statusbar and are shown on
every page.
The navigation bar n briefly indicates which page you are on.
The navigation bar n is shown on all pages.
From the start screen, you can change to the status page or
access other pages. The statistical data, eBike battery range
and average values are displayed on these pages.
If you are on a different screen to the start screen when the
eBike is switched off, the most recently displayed screen will
appear again when the eBike is switched on.
Press the button or
through the screens.
0 275 007 3BK | (14.02.2023)
a
b
c
km/h
i
j
k
l
.7
m
n
button to scroll
Briefly press the select button
through all the screens. This is how you access,
e.g. the status screen.
Navigation
The navigation function on the Kiox 300/Kiox 500 assists
you when exploring unfamiliar areas. You can plan and start
navigation on your smartphone in the eBike Flow app. You
need the current software version in order to use navigation.
To do this, keep your eBike Flow app and your on-board
computer up to date.
The route guidance and navigation information (e.g. turn-by-
turn instructions) are shown on the on-board computer.

Maintenance and servicing

Maintenance and cleaning

Do not clean any of the components with pressurised water.
Keep the display of your on-board computer clean. Dirt can
cause faulty brightness detection.
Clean your on-board computer using a soft cloth dampened
only with water. Do not use cleaning products of any kind.
Have your eBike checked by an expert at least once a year
(including mechanical parts, up-to-dateness of system soft-
ware).
In addition, the bicycle dealer may base the service date on
the distance travelled and/or on a period of time. In this
case, the on-board computer displays a message telling you
when the service date is due each time it is switched on.
Please have your eBike serviced and repaired by an author-
ised bicycle dealer.
Have all repairs performed only by an authorised bike
u
dealer.
Note: If you are handing in your eBike to a bicycle dealer for
maintenance, it is recommended that you temporarily deac-
tivate the <eBike Lock> and <eBike Alarm> to prevent
false alarms.
After-sales service and advice on using products
If you have any questions about the eBike and its compon-
ents, contact an authorised bicycle dealer.
For contact details of authorised bike dealerships, please
visit www.bosch-ebike.com.
Transport
If you transport your eBike attached to the outside of
u
your car, e.g. on a bike rack, remove the on-board
computer and the eBike battery (exception: built-in
eBike battery) to avoid damaging them.
Disposal and substances in products
You can find information about substances in products at the
following link:
www.bosch-ebike.com/en/material-compliance.
to scroll
Bosch eBike Systems