BWT PK MAX Bedienungsanleitung Seite 8

NOTE
: In case the robot is moving in circle or cannot cover the entire pool, set the tube
B to position " " as below:
Note: You will hear a "click" sound everytime you adjust the fin.
Pool Preparation
- If there are stones, roots or metal corrosion in contact with the underside of the liner,
discard them prior to using the robot. If necessary, seek assistance from a qualified
professional.
- If the liner is brittle, damaged or wrinkled, contact a qualified professional to perform the
necessary repairs or perform a liner replacement prior to using the robot.
- Remove any pool ladder, surface skimmer, and other floating objects from the pool as
they may obstruct the movement of the robot's float and, consequently, the movement of
the robot also.
- If you are using a saltwater pool, make sure all salt are dissolved before placing the
robot into the water.
IMPORTANT NOTE: Turn off the filtration system (as instructed in your filtration
manual) at least 15 minutes prior to deploying the robot.
OPERATION
WARNING!
- Make sure the robot is off.
- Ensure the charging plug is detached and the charging port is plugged with
the protective cap before the robot is deployed.
1. Bring the robot to the side of your pool. NOTE: Only deploy the robot from the pool side
(not the pool corner) and ensure it is facing outwards as you do so. Attach the hook of
7/195