BWT PK MAX Bedienungsanleitung Seite 2

SAFETY WARNINGS & INSTRUCTIONS
Information contained in this Instruction Manual will help you operate the item safely,
protect yourself and others from hazards, and prevent damage to the device and other
property.
SAVE THESE INSTRUCTIONS
WARNING!
- This is not a TOY. Children should be kept out of reach from this robot
and its accessories.
- Never allow children to operate this product.
- This appliance is not intended for use by persons with reduced physical,
sensory, mental capabilities, or a lack of experience and knowledge,
unless they are given supervision or instructions concerning the safe
use of the appliance and understand the hazards involved by a person
responsible for their safety.
- Children must not play with this product.
- Cleaning and maintenance of the robot must not be carried out by
children.
Make sure the robot is fully immersed in the pool before initiating
-
operation. The minimum water level required to operate the robot must
reach above the swivel head of the robot. Operating the robot when it is
not immersed correctly could damage the unit and void the warranty.
Maximum operating depth in water is 3 meters (9.8 ft).
-
Operating water temperature: 5˚C (41˚F) –35˚C (95˚F)
-
Detachable supply unit (external adaptor).
-
The robot should only be recharged with the external adaptor and
-
charging plug delivered with this product
For the purposes of recharging the battery, only use the detachable
-
supply unit (external adaptor model number: DSS28-1262000-B /
DSS28-1262000-C / DSS28-1262000-D / LX126200) that provided with
this robot to charge the battery.
Connect the external adaptor to a power source through a residential
-
current device (RCD) / a ground fault circuit interrupter (GFCI). If in
doubt, consult a qualified electrician.
- Do not use this robot if any damage is detected.
- Replace damaged parts with ones that are certified by the distributor or
manufacturer.
- Turn off the robot, disconnect the external adaptor from the power
source, and unplug the external adaptor from the charging plug, before
detaching the robot from the charging plug.
- Disconnect the robot from the supply mains and make sure the robot is
OFF prior to carrying out regular maintenance – such as cleaning the
filter, swivel smoothing-ring, and the areas around the water sensors
and charging port.
1/195