BWT PK MAX Bedienungsanleitung Seite 10

Power indicator lights
3. Slide the power switch to "ON" (while the robot is still submerged) – the indicator light
will turn on and activate the motor automatically (water level covering the sensors at
the top of the swivel head). Let the robot sink to the pool floor and observe its first
forward and reversed movements across the pool bottom. If it runs along the pool wall
instead of perpendicularly, retrieve it and redeploy it while making sure its front/back
is facing the pool wall.
Power indicator lights:
As the robot moves around the pool and collects debris, battery levels will gradually drop
and the indicator lights will follow suit.
NOTE:
- Refrain from making any physical contact with both water sensors.
4. To retrieve the robot from the pool, attach the hook to a telescopic pole (not provided)
and use it to retrieve the float, if you are unable to retrieve with your hands.
(For EU & USA only)
(For Australia and New Zealand only)
(Green)
4 lights ON
Last light blinks
Up to 120 minutes left
Only 10 minutes of usage
remains once the last light
starts blinking.
9/195