Ecotech Italia H24 LYNX Bedienungsanleitung Seite 135

Every 50 hours
Component
Electrical system wirings
Track tensioner
Every 100 hours
Component
Endothermic engine
Every 200 hours
Component
Endothermic engine
Every 250 hours
Work to be carried out
Endothermic engine
Hydraulic system
Every 500 hours
Component
Hydraulic system
Every 4000 hours or 2 years
Work to be carried out
Complete machine
Every 4000 hours or 4 years
Component
Complete machine
Work to be carried out
Check wear and tear
Greasing the track tensioner
Work to be carried out
Replace oil
Replace fuel filter
Work to be carried out
Replace the oil filter
Reference
Replace air filter
Replace oil filter
Work to be carried out
Replace oil
Reference
Replace fuel pipes
Work to be carried out
Replace hydraulic pipes
135
Reference
If signs of damage, worn
insulating material or
anomalous heating are found,
contact the customer care
centre
Perform the "Greasing the track
tensioner" procedure
Reference
See "Engine oil replacement"
Reference
See "Oil filter replacement"
Reference
See "Replacing the hydraulic
oil filter"
Reference
See "Hydraulic oil replacement"
Reference
Reference
EN