Ecotech Italia H24 LYNX Bedienungsanleitung Seite 134

Table 3: Maintenance intervals
Every working day
Component
EN
Complete machine
Remote control
Upper engine air conveyor
grid
Endothermic engine
Fuel tank
Hydraulic system tank
Exchanger and solenoid valve Clean from any working residues
After the first 8 hours of running-in
Component
Endothermic engine
Complete machine
Every 50 hours
Component
Fuses
Alternator
Starter motor
Connectors
Lithium battery
Work to be carried out
Clean from working residues.
Check the tightening of screws and
bolts
Check any leaks of oil or fuel
Check the correct operation of the
emergency stop buttons
Check the wear and tear of the
working equipment and related
protections
Check the operation of the acoustic/
visual indicators
Check the safety signs
Check the tensioning of tracks
Check its correct operation
Check the battery status
Check that there are no processing
residues
Check oil level
Check air filter
Check fuel level
Check oil level
Work to be carried out
Replace oil
Check the conditions of the blade,
related supports and the tightening
of safety screws
Work to be carried out
Check integrity
Check cables
Check cables
Check tightening
Check charging (with voltmeter min
12.4 V)
Check clamp connection
134
Reference
See "Oil engine level check"
See "Air filter check and
cleaning"
See "Hydraulic oil level check"
Reference
See "Engine oil replacement"
Reference
If oxidation signs are found,
remove it and make sure that
the ground wire contact
(BLACK) does not intercept the
power supply contact (RED).