Overheat Protection; Preparing For Use; Using The Appliance; Hand Blender - Philips HR1616/00 Bedienungsanleitung

Caution
- Switch off the appliance and disconnect it from the mains if you leave it unattended and before
you assemble, disassemble and clean it.
- Never use any accessories or parts from other manufacturers or that Philips does
invalid.
- This appliance is intended for household use only.
- Do not exceed the quantities and processing times indicated in the tables.
- Do not process more than one batch without interruption. Let the appliance cool down for 10
minutes before you continue processing.
properly and according to the instructions in this user manual, the appliance is safe to use based on

Overheat protection

This appliance is equipped with overheat protection. If the appliance overheats, it switches off
automatically. Unplug the appliance and let it cool down for 10 minutes. Then put the mains plug
back into the wall socket and switch on the appliance again. Please contact your Philips dealer or an
authorised Philips service centre if the overheat protection is activated too often.
Thoroughly clean the parts that come into contact with food before you use the appliance for the

Preparing for use

1 Let hot ingredients cool down before you process them or put them in the beaker (max.
temperature 80°C).
2 Cut large ingredients into pieces of approx. 2cm before you process them.
3 Assemble the appliance properly before you put the plug in the wall socket.

Using the appliance

Hand blender

The hand blender is intended for:
-
- mixing soft ingredients, e.g. pancake batter or mayonnaise.
- pureeing cooked ingredients, e.g. for making baby food.
1 Put the ingredients in the beaker.
See the table for the recommended quantities and processing times.
ENGLISH
7