GB Assembly
Assembly instruction
1. With screws (7) and washers (8), screw the massager brackets (2) to the columns (1).
1
2. Install the massager frame (3) on the massager brackets (2) with screws (9), washers (10) and safety nuts (11).
3. Install the massager (4) on the massager frame (3). To do so, use screws (13), washers (10) and spring washers (12).
4. Put sponges (5 and 6) on the massager's frame parts (3) indicated in the picture.
Warning! Assemble the device in accordance to the instruction above and tighten the screws strongly. When you finish assembly, before you
start to use the treadmill, check if everything is alright.
58