Balluff BIS U-830-4-011-H Serie Kurzanleitung Seite 5

BIS U-830-4-011-H-_
Mobile RFID devices – UHF write/read module
Using the plug-in module
Plug-in module
The module can be used on the top module slot of the
basic device.
Attaching and removing the plug-in module
CAUTION
Risk of injury from crushing or squeezing
There is a risk of injury from crushing or squeezing during
sliding when attaching and removing the module. The
scanner glass may also become soiled.
► Do not reach into the area of the plug-slide
mechanism when attaching and removing the
module.
► Do not touch the scanner glass with fingers.
The plug-in module can be attached and removed by
sliding it to the side (see picture).
www.balluff.com
Using a plug-on module
After the UHF write/read module has been inserted in the
basic device (top slot, see user's guide), it can be used for
reading out UHF RFID tags.
The module must be initialized using a software
application. Afterwards the read process can be performed
using the software application.
The plug-on module can become very warm
during continuous operation. In order to protect
individuals and the module, the maximum time of
a scan is restricted to two minutes.
english 2