Apex Domus 2+ Bedienungsanleitung Seite 9

Domus 2+ / English
3. Installation
3.1 Pump & Mattress Installation
Several installation tips are listed below:
Warning- After installation, the extra length of the power cord, if any, should be neatly arranged to
avoid any tripping accidents. The EQUIPMENT should be firmly placed at position where
users/doctors can easily access.
1. Place the mattress on top of the bed frame. Fasten
the Nylon Straps to secure the mattress to bed
frame if available.
Warning- The overlay mattress must be
applied on the underlying mat-
tress
2. Clip the plastic hanger on the back of pump in a
bottom-to-top direction and hang the pump onto
bed rail (foot-end) or place the pump on a flat sur-
face.
3. Connect quick connector from air mattress to the
pump unit. When a "click" is felt or heard, the
connection is completed and secured.
NOTE- Check and ensure the air hoses are
not kinked or tucked under mat-
tress.
6