Furniture; Shampooing Of Upholstery And Tapestries - Philips HR6836 Bedienungsanleitung

Furniture

72 73
Shampooing of upholstery and tapestry
- Attach the upholstery nozzle directly to the
handgrip (fig. 72).
• This nozzle is very convenient for
shampooing furniture, tapistry, curtains, etc.
(fig. 73).
Cleaning and maintenance
- Switch off. Remove the mains plug from the
wall socket.
- All parts of the appliance, including the
container, may be cleaned with a damp
cloth and if required some detergent.
However, ensure that no water enters the
motor part!
74 75
- Rinse the float unit with foam filter (fig. 74).
To guarantee optimum life time of your
foam filter, it is advisable to carefully
remove it from the
float unit (fig. 75)
76
and handwash the
filter separately
(fig. 76).
Please note: you
can squeeze the
foam filter, but do
not wring!
All manuals and user guides at all-guides.com
- The motor protection filter can also be
- Rinse the Double Injection shampoo nozzle
- Fill the water reservoir with lukewarm clean
• To extend its life, the shampoo pump
- Pour 1 litre of white vinegar into the
- Let the shampoo pump run in shampooing
- Repeat this procedure with 1 litre of clean
14
77 78
removed (fig. 77) and rinsed (fig. 78) for
cleaning.
Do not forget to replace the motor
protection filter!
80
79
(fig. 79).
You can remove the hard floors attachment
(fig. 80) and clean it separately.
water. Pump the water out via the two
shampoo tubes into a water outlet (sink,
toilet). This will prevent shampoo
remainders to crystallize and clog inside the
tubes.
should be cleaned with a mixture of water
and white distilled vinegar once a year.
shampoo container and fill it up with clean,
lukewarm water.
position until the shampoo container is
empty. Collect the vinegar solution in a
bucket.
water to rinse out any vinegar residues.
2
1