Power Failure; Door Alarm - Sharp SJ-WS360T Bedienungsanleitung

Power Failure

inside temperature caused by power failure or something.
1
Press the select button and select the power failure
icon. (The icon is orange.)
2 Press the button. [
3 Press the button.
To cancel operation
It is the same method as starting operation.
Press the button in step 2.
Indication of power failure
will blink slowly.
Blink slowly
How to cancel the indicator blink
Press the button while the icons are blinking.
Flashing
°C

Door Alarm

sound.
door and again after 1 minute (once in each case).
sound continuously.
To cancel operation
1 Press the select button and select the door alarm
Flashing
Door alarm indication
2 Press the button. [
3 Press the button.
The indication will disappear.
To start operation
It is the same method as canceling operation.
Press the button in step 2.
1
2 3
It shows Door alarm "ON".
11