Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Reshuffle the programme list
You can change the order of the stored TV
channels.
&
Select
in the Installation menu.
Reshuffle
é
Follow the instructions on screen.
TV Setup
Speakers General Source Decoder
Setup
Test tone
Balance
Centre volume
(Surround volume)
Surround speakers
Auto surround
Speakers
Your TV is equipped with integrated front left, right
and centre loudspeakers, capable of reproducing
Stereo, Dolby 3 stereo and 3D Surround modes.
For full Dolby Pro Logic and Hall you should use
two amplified rear surround speakers connected to
the back of the TV.
See Extra loudspeakers/Amplifier, p. 24.
Depending on the output and Surround mode (see
Main menu,TV, Sound, Surround mode, p. 12)
selected, some menu items may be greyed out and
are not selectable.
Test tone controls
The menu item
Test tone
balance the volume levels of the speakers.
&
Select
and press the cursor right.
Test tone
é
Once turned on, the Test Tone will circulate
through the left, centre, right speakers and
both rear surround speakers (if present).
"
Press the cursor up/down to select the desired
speaker for individual volume level adjustment.
'
Press the cursor left/right to adjust the volume
level.
All manuals and user guides at all-guides.com
Select Favourite TV channels
&
é
"
'
The Setup menu contains items that control the
settings of the TV's functions, features, services and
peripherals you may have connected.
The
controls.
The
that will typically be accessed only occasionally.
The
The
more programme numbers as decoder programme
numbers.
Surround Speakers
Auto Surround
enables you to
Select
Favourite programmes
menu.
Select your programme number with the
cursor up/down.
Select
Yes
or
No
with the cursor right.
Repeat
é
and
"
for every TV channel or
external you want to make a favourite or a
non-favourite TV channel or external.
menu reflects the speaker-related
Speakers
menu allows you to change settings
General
menu allows you to select a source.
Source
menu allows you to define one or
Decoder
See Connect Peripheral Equipment, Extra
loudspeakers/amplifier, p. 24.
If no Surround Speakers are connected do
not change the predefined factory settings
which is
Off
. If Surround Speakers are
connected select
On
.
(Dolby Pro Logic and Hall are not available
if Off is selected.)
Sometimes the broadcaster transmits
special signals for Surround Sound
encoded programmes.
The TV automatically switches to the best
surround sound mode when
is switched
.
Surround
On
However it is possible to overwrite this
setting.
in the Install
Auto
7
Werbung
Inhaltsverzeichnis
