Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Set/Change code
The Child lock feature (see TV, Features, p. 13)
allows you to lock channels to prevent others from
watching certain programmes.To watch locked
channels, a 4-digit code must be entered.The
Set/Change code menu item allows you to create
or change a Personal Identification Number (PIN).
&
Select
Set/Change code
é
If no code exists yet, the menu item is set to
. If a code has previously been
Set code
entered, the menu item is set to
Follow the instructions on screen.
Source
Source
Setup
EXT1
EXT2
EXT3
EXT4
SIDE
Centre input
Centre in vol.
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g. DVD,
this source will automatically be selected when
your remote control is in DVD mode, see p. 3, and
when you press the v key on the remote
control.
Decoder
Decoder
Setup
All manuals and user guides at all-guides.com
Important:You have forgotten your code !
&
é
"
.
.
Change code
Centre input - Centre in volume
If a decoder or a descrambler is connected, see
p. 22, you can define one or more programme
numbers as decoder programme numbers.
&
Programme
Status
é
"
'
Select
e in the General menu and
Change cod
press
.
OK
Press the cursor right and enter the overriding
code 8-8-8-8.
Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
When you have connected a surround receiver
to the TV see p. 24, the loudspeakers of the TV
can act as centre speaker, making a separate
centre speaker unnecessary.
Select
or
Centre input On
(in case you have connected a Cinema Link
surround receiver).
When having selected
On
Centre in volume with the cursor left/right to
correct volume level differences of the external
audio receiver and speakers.
Note: This is not the case with a Cinema Link
surround receiver.
Select
Decoder
with the cursor right.
Select
.
Programme
Select the programme number under which
you have stored the programme coming from
your decoder.
Select
.
Status
• Select the input used to connect your decoder:
,
or
.
None
EXT1
EXT2
• Select
if you do not want the selected
None
programme number being activated as a
decoder programme number.
Note: Select
when the decoder is connected
EXT2
to your EasyLink video recorder.
.
Cinema Link
you can adjust the
9
Werbung
Inhaltsverzeichnis
