Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Surround Modes
Dependent on your personal preference and the
sound signal broadcasted, select one of the
Surround modes. Only the speakers indicated in
the drawings can reproduce sound.
Stereo
This mode reproduces only the
left and right front sound signals.
Dolby 3 Stereo
(optimal with Dolby Surround broadcasting)
The Dolby Pro Logic* sounds are
distributed over the front left, the
front right and the centre TV
loudspeakers.
3D Surround
(optimal with Dolby Surround broadcasting)
3D Surround enables you to
experience the 3D effect of
Dolby Surround Pro Logic
without the need of having rear
speakers connected or activated.
The graphical representation of the rear
loudspeakers is replaced by the symbol ®r.
Select the level of 3D effect with the cursor
left/right.
* Dolby' 'Pro Logic' and the double-D symbol
license from Dolby Laboratories Licensing Corporation.
Features menu
Features
TV
Programme list
Subtitle
Sleeptimer
Pause clear
Child lock
On timer
Zoom
&
Press the cursor right to select
é
Select the menu items with the cursor
up/down and adjust the settings with the
cursor left/right.
i
Press the
key on the remote control to get
information about the selected menu item.
12
All manuals and user guides at all-guides.com
Hall
The sound signal is distributed over the rear
Dolby Pro Logic
(optimal with Dolby Surround broadcasting)
Note:
• Normal stereo broadcast is not always encoded to
• In case of a Cinema Link receiver configuration
• Pro Logic and Hall can only be reproduced if Surround
are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under
Programme list
Off
On
On during mute
Select subtitles
.
Features
loudspeakers which creates a
hall effect from the rear.
The centre loudspeaker does
not reproduce any signal.
All front and rear
loudspeakers reproduce the
Dolby Surround Pro Logic
sounds.
This sound is always present
in the movie or programme
marked with G Dolby
Surround.
produce a rear surround sound effect.
connected, only the surround modes of the external
receiver can be selected.
speakers is set to Yes in the Setup, Speakers menu,
p. 7, and rear speakers are connected.
Press the
key to switch over to the
OK
selected TV channel or external.
The subtitle page must be stored for each TV
channel:
Switch on teletext and select the proper
subtitle page from the index. Switch off
teletext.
will automatically display them on
Subtitle On
the selected TV channels if subtitles are in the
transmission. A symbol will indicate that the
mode is on.
Select
On during mute
have the subtitles automatically displayed only
when the sound has been muted with the ¬
key on the remote control.
when you want to
Werbung
Inhaltsverzeichnis
