English; Battery Fully Charged; Battery Running Low - Philips HQ9190CC Bedienungsanleitung

EnglisH

6
by a rotating key symbol). If you do not press the on/off
button again within a few seconds, the travel lock is
activated and the display will not switch to the first
display layout mode. To deactivate the travel lock, press
the on/off button for 3 seconds again (see chapter
'Storage').
You can change the display layout at any time.
Note:when you start using the shaver for the first time
or after a long period of disuse, it could take several
minutes before anything appears on the display.
The display provides the following information:
Charging
Number layout:
,
When the shaver is being charged, the display shows
the minutes indication and the plug symbol with a
blinking power symbol.
Battery symbol layout:
,
When the shaver is being charged, the display shows
the battery symbol and the plug symbol with a
blinking power symbol.

Battery fully charged

As soon as the battery has been fully charged,
,
the word 'FULL' runs across the display.
After a few hours the word 'FULL' stops
,
appearing. The display shows the minutes
indication and the plug symbol or the battery
symbol.

Battery running low

Number layout:
,
When the battery is running low, the display shows a
blinking minutes indication and blinking plug symbol
when you switch the shaver off.