Herunterladen Inhalt Inhalt Diese Seite drucken

Insert Battery; Remove The Battery; Charging The Battery; Maintaining The Battery - Blaupunkt FM 03i Anleitung Für Schnelleinstellung

Mobiltelefon
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
EN
card is inserted correctly before use.
Note that the device may shakes, the memory card may slide out of the slot,
so please do not bend it, scratch the memory card or expose it to static
electricity or dust, do not immerse it in water. Place the memory card in the
slot on the back of the phone, withits chip facing down, as shown on the
device.
Please be careful when using a memory card, especially when it is removed.
Some memory cards must be formatted with a computer before use.

4.3. Insert battery

1. Insert the battery chip into the protruding metal point in the battery slot,
insert the battery, and push the top down until the battery engages in the
recess.
2. Put back the back cover.

4.4. Remove the battery

To remove the battery, turn off the device, remove the cover and then
remove the battery at the top.
Note:
Please remove the battery when it is switched off, as it may cause abnormal
operation when the device is switched on.

4.5. Charging the battery

Connect the charger to the appliance and plug the other end into the socket.
If the device is turned on while charging, the battery icon will move in the
right corner of the display. Charging is completed when the charging
indicator on the top right is lit. If charging is switched off, a charging
indicator appears on the display. When charging is complete, unplug the
charger from the unit.
Note: When the battery voltage is low, a warning message is displayed on
the display. Charge the battery as soon as you can, to avoid any
inconvenience, the device can be switched off during a telephone
conversation. Your device can automatically turn off when the power level is
too low.
1. If you use the battery at a persistently low charge, it may adversely affect
the battery life and quality.
2. Use only the charger approved by the manufacturer for proper operation.
3. Do not remove the battery during charging.
4. Fill the unit for at least 4 hours before first use. This can increase the
efficiency of the multiple charge and discharge cycles.

4.6. Maintaining the battery

The device has a rechargeable battery. When not using the charger,
disconnect it from the power source. For more than a week, do not leave
3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis