Insert Battery; Remove The Battery; Charging The Battery - Blaupunkt Sand Kurzanleitung

EN
withits chip facing down, as shown on the device.
Please be careful when using a memory card, especially when it
is removed. Some memory cards must be formatted with a
computer before use.

4.3. Insert battery

1. Insert the battery chip into the protruding metal point in the
battery slot, insert the battery, and push the top down until the
battery engages in the recess.
2. Put back the back cover.

4.4. Remove the battery

To remove the battery, turn off the device, remove the cover and
then remove the battery at the top.
Note:
Please remove the battery when it is switched off, as it may
cause abnormal operation when the device is switched on.

4.5. Charging the battery

Connect the charger to the appliance and plug the other end into
the socket. If the device is turned on while charging, the battery
icon will move in the right corner of the display. Charging is
completed when the charging indicator on the top right is lit. If
charging is switched off, a charging indicator appears on the
display. When charging is complete, unplug the charger from the
unit.
Note: When the battery voltage is low, a warning message is
displayed on the display. Charge the battery as soon as you can,
to avoid any inconvenience, the device can be switched off
during a telephone conversation. Your device can automatically
turn off when the power level is too low.
1. If you use the battery at a persistently low charge, it may
adversely affect the battery life and quality.
2. Use only the charger approved by the manufacturer for proper
operation.
4