Inhaltsverzeichnis
Werbung
EN
Remove all packaging materials. This includes the foam base and all adhesive tape
holding the wine cellar accessories inside and outside. Keep them out of children's
reach and dispose them in an environmentally friendly manner.
Clean the inside and outside of the appliance with water and a mild detergent before
putting any wine in it.
After the appliance has been levelled and cleaned, wait for at least 2 hours before
connecting it to the power supply. If your wine cellar has been tilted for any reason,
wait 24 hours before plugging it in. See section INSTALLATION.
Once you have plugged the unit into an electrical outlet, let the unit run for at least
30 minutes to acclimatize itself before making any adjustments.
The temperature is automatically set to 12 °C. If desired, you can change the tem-
perature manually. Please see TEMPERATURE.
The buttons on the control panel are touch keys, which respond when lightly touched with
A
B
A Interior light button
B °C /°Fconvertion button
C Temperature adjust button:down
D Display
In the lock screen state, long press the lock key for 3S, the display screen displays
3, 2 and 1, the display screen is unlocked, and the lock icon is half lit;If there is no
operation, the screen will be locked automatically after 30s,In the lock screen
state, all the lock key icons are on, and the keys on the display screen cannot be
operated (except the lighting key);
power key , the display screen displays 5, 4, 3, 2 and 1, and the power of the whole
5, 4, 3, 2, 1. The power is on.
C
D
E Temperature adjust button:up
F Temperature zone selection button
G Lock button
H Power button
F G H
E
Werbung
Inhaltsverzeichnis
