Product Features - Instar In-8403 2K+ Poe Bedienungsanleitung

3. Product Features

Hardware
Image Sensor
Wide-Angle Lens
MicroSD Card
PIR Sensor
Microphone
Software
Privacy Areas
Alarm Areas
Alarm Triggers
Pre-Recording
Notifications
Smart IoT
Video Recording
Video Stream
Photo Series
Free App
Connectivity
P2P
DDNS
Cloud
FTP Upload
PoE
HTTPS
Go to https://install.instar.com
WQHD Sony STARVIS CMOS Sensor / Resolution 2560 x 1440px
Exchangeable 4.3mm lens with a ~90° diagonal field of view
Max. 256GB (32GB incl.) for alarm or manual recording (15 sec.)
Integrated passive infrared motion detector
Integrated microphone
Use up to 8 privacy masks to prevent areas from being recorded
Define four areas for software motion detection and link with PIR
Supports motion, heat, object and noise detection
Alarm videos start three seconds before the trigger event
Alarm emails and push (text) notifications in case of an alarm trigger
Smarthome Integration by Alarmserver, MQTT(S) and HTTP(S) API
15s alarm and/or manual recording on MicroSD
Supported protocols RTSP, HTTP (HTML5), ONVIF, MJPEG...
Interval snapshots for website integration or time lapse videos
Our free app InstarVision is available for iOS, Android and Windows
Free point-2-point connectivity with InstarVision, works with IPv6
Free DDNS address to connect to your camera via the internet
Optional upload & management of alarm videos in the INSTAR Cloud
Upload alarm images / videos to an FTP server (FTP / FTPS / SFTP)
Power over Ethernet, IEEE 802.3af (+ Pin 4 and 5 / - Pin 7 and 8)
Access the WebUI via HTTPS with secure TLS encryption
4-EN