LENCO DAR-251 Bedienungsanleitung Seite 14

Manual Scan
1. Press the MODE key on the main unit to select "FM Mode''.
2. Select FM mode as previously described, if required.
3. Press [] or [] shortly adjust tuning. Each press of the tuning button will change the frequency up
or down by 50 kHz.
4. When the waveband end is reached, the radio will recommence tuning from the opposite
waveband end. If no stations are found, please ensure the aerial is extended and test the
reception by doing another auto scan in a different location.
Menu
1. Scan Setting
In FM mode, press MENU to enter the FM menu, then press [] or [] to select [Scan setting], then
press ENTER to select the sensitivity setting:
1.1. All stations: 15dB~
1.2. Strong stations only: 19dB~
2. Audio Setting
2.1. Stereo allowed:
2.2. Forced mono
2.3. System (FM system), same as DAB system setting.
3. PRESET:
3.1. Preset Recall (Choose the Station):
To recall a presseted FM station, press [MENU], select [PRESET RECALL], press [ENTER], then
use the < or > button to find the station you want to recall and press [ENTER] to confirm.
- EN 14 -