LENCO DAR-251 Bedienungsanleitung Seite 12

Prune (To Remove Stations That are Listed But Unavailable)
In DAB mode, press [] or [] to display the "Prune" submenu, press [ENTER] button to select the
Prune option "Yes" or " No".
System (DAB)
In DAB menu, press [] or [] to show the "SYSTEM" submenu, press the [ENTER] button to go to
the system settings.
1. Language
Press [ENTER] to go to language selection; the default source language is English, the selected
language will have "*" displayed at the top right. Users may choose between English, French,
Italian. Deutsch, Polish, Nederlands, Espanol
2. Factory Reset
Press [ENTER] to perform a factory reset. If you wish to perform the reset operation, push [] or
[]until "YES" is highlighted on the display and press [ENTER]. A full reset of your radio will be
performed. All presets and station lists will be erased.
3. SW Version
Press [ENTER] to view software version. Press Menu to stop displaying the software version.
*If there are no operations after 30 seconds, the display will return to normal.
Preset
1. Preset Recall
In DAB menu, press[] or [] to select "Preset Recall", then press [ENTER] and look for the station
(preset) you want to play by pressing <or> and when found, press [ENTER].
Note:
Note: you have not previously stored a preset station and the preset button is pressed, "Empty
preset" will be displayed.
2. Preset Store
You may store your preferred DAB stations to the preset station memories. There are 50
memory presets in your radio. Presets are remembered by your radio in the event of a power
failure.
- EN 12 -