Locomotive Settings - roco 71002 Handbuch

The Sounddecoder

▪ Locomotive Settings

The Sounddecoder has been optimally adjusted to this locomotive. You can still adapt numerous decoder properties to your wishes however.
Certain parameters (referred to as CVs – Configuration Variable – or register) can be amended.
Please check before each programming if this is really necessary. Incorrect settings can result in the decoder not reacting correctly.
The decoder is preprogrammed with 28/128 speed steps at the factory for a high level of comfort. This means that it can be used together
with all of the modern DCC (MULTIMAUS) and Motorola
The Sounddecoder has been especially modified for the additional functions and
must not be replaced with a decoder which is available from a retailer.
If the locomotive is to be reprogrammed, only the locomotive is to be on the
programming track
71002.indd 27 71002.indd 27
control devices.
®
27
30.03.2023 08:32:29 30.03.2023 08:32:29