T+A P 3100 HV Betriebsanleitung Seite 43

Menu point
Balance
Tone Control
Tone (L) / (R)
This sub menu points only
appears, if "separate for L/R"
under the menu item "Bass /
Treble settings" is chosen. In
this case the settings for bass and
treble can be done separately for
each channel.
Treble
Bass
Loudness
Loudness Level
Room Correction
Room Correction (L) / (R)
Bass / Treble settings
Adjustment range options:
99 L ... 0 ... 99 R
off / on
- 6 ... 0 ... + 8
- 6 ... 0 ... + 8
off / on
- 30 ... 0 ... + 10
off / on
This purpose of this menu point is to call up the configuration menu for room
correction for the left / right channel.
The following set-up options are available:
same for L/R /
independent for L/R
Explanation:
This menu point is used to alter the balance in
level between the left and right channels, e.g.
to compensate for
loudspeaker positioning. The balance can be
adjusted in increments of 1 dB; the screen
always displays the current value.
This menu point can be used to disable (by-
pass) the P 3100 HV' s tone controls.
To switch off the tone controls, select the "OFF"
setting. When the tone controls are switched
off, any adjustments you make to the following
menu points "BASS" and "TREBLE" have no
effect.
The purpose of this menu point is to call up the
configuration menu for tone control for the left /
right channel.
The sub menu points „Treble" and „Bass"
correspond to the menu items below.
This menu point is used to adjust the treble
settings.
This menu point is used to adjust the bass
settings.
This set-up option is used to switch loudness on
or off.
This menu point is used to adjust the loudness
level.
This menu point can be used to disable (by-
pass) the P 3100 HV's room correction.
This menu point can be used to change the
method of controlling the tone settings. The
bass and treble values can be altered together,
if "same for L/R" is set. To alter the values
separately for each channel, "independent for
L/R" must be set.
non-symmetrical
43