T+A P 3100 HV Betriebsanleitung Seite 42

Calling up and operating the
menu
42

Briefly press the -button on the front panel or the  button on the
remote control handset to call up the menu.

When you open the menu, the following Select points appear on the screen:
* This sub menu point only appears, if "separate for L/R" under the menu item "Bass /
Treble settings" is chosen. In this case the settings for bass and treble must be done
separately for each channel.
**
appears only, if the menu is opened by the  button on the front panel.
Using the front-panel controls:

The VOLUME knob is used to select any point within the menu system.

To change a selected menu item, press the VOLUME knob to confirm your
choice, then adjust the value by rotating the knob.

After making the adjustment, press the VOLUME knob again to adopt the new
setting.

You can interrupt the process at any time by pressing the  button; in this
case any changes you have made are discarded.

Holding the VOLUME knob pressed in takes you one level higher in the menu
system.

Press the  button again to quit the menu.
Using the remote control handset:

Use the  /  buttons to select an item in the menu.

If you wish to change a selected menu item use the  /  buttons
to alter it.

Press the  button again to leave the menu.