Parts List - Swim & Fun Santorini XL Pool Bedienungsanleitung

4.

Parts list

The following items can be found in the package:
1 90° Allen key
2 Transparent cover
3 Locking ring
4 Filter tank
5 Threaded connection Ø32/38
6 Base for the filter pump
7 Filter pump
8 Connection hose Ø 32 mm
5. Setting up the sand filter system
Assemble the system at the final location. The distance from the pool to the filter system must be
at least 3.5 m. The water temperature must not exceed + 35
the plug before carrying out any installation work.
NOTE!
The filter system must ALWAYS be placed at the same level as the bottom of the pool,
so that the water will flow naturally by itself towards the pump. If the pool is below
ground, the sand filter system must be correspondingly placed in a filter shaft so that
the water flows by itself to the pump. Remember that the shaft must remain dry. It must
therefore have a drain so any water is diverted away from the shaft.
5.1 Assembling the filter system
54
o C or drop below 0
MV-1087-11-2017 . © All rights reserved Swim & Fun Scandinavia ApS
UK
c. Always remove
o