Table of contents
1. General ............................................................ 50
1.2 Warranty ..................................................... 52
4. Parts list ........................................................... 54
5. Set-up of the filter system ................................ 54
5.1 Fitting ......................................................... 54
5.2 Connecting to the pool ............................... 57
1.
General
Thank you for purchasing a Swim & Fun product. We develop and improve our products on an
ongoing basis. Should this product not meet expectations and have a fault or be missing anything,
then we are sorry for the inconvenience and ask that you please contact your dealer or our cus-
tomer service at swim-fun.com
This product is designed for private use and is not suitable for commercial use.
You have purchased a technical product. The management is easy and simple, but requires compli-
ance with certain precautions. Therefore, we ask that you read the following instructions carefully!
Filterballs in the tank ensure that dirt and other floating particles are efficiently removed from the
bathing water. The dirty water is fed from the pool through a hose to the filter pump, which further
pumps the water to the filter tank. When the water is fed through the filter tank, the dirt is captured
by the filter balls, and the clean water flows back through the return hose to the pool.
It is necessary to use a skimmer (surface skimmer), in order to use the filter system. It must either
be an integrated skimmer (built into the pool wall - photo 1) or a suspended skimmer (hangs over
the pool wall - photo 2).
Photo 1 - integrated skimmer
50
Photo 2 - suspended skimmer
MV-1087-11-2017 . © All rights reserved Swim & Fun Scandinavia ApS
UK