Dometic SINEPOWER DSP1312T Montage- Und Bedienungsanleitung Seite 19

SinePower
10.4 Configuring the inverter
You can adjust the device using the DIP switch (fig. 2 5).
Defining settings
Using the S1 dip switch you can define whether the parameter of the setting should
be made using the connection of a CI BUS capable control panel or the dip switches.
Parameter
Remote control connection
Setting the mains voltage
You can set the mains voltage using the S2 dip switch.
Mains voltage
230 V/50 Hz
240 V/60 Hz
EN
Dip switch
Using the inverter
Dip switch
S1
Off
On
DIP switch
S2
Off
On
19