Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Bluetooth telephoning
Bluetooth telephoning
Accepting and rejecting incoming
calls
When a call arrives, a ringtone will sound and
"CALL" appears briefly on the display followed
by the name or number of the caller or
"PRIVATE NUMBER" if no caller details are
available.
Note:
Turn the volume control 1 anticlock-
wise or clockwise to adjust the
volume of the ringtone.
To accept the call,
f press the
button 2 .
"IN CALL" is shown on the display during the
call.
Notes:
Turn the volume control 1
f
anticlockwise or clockwise to
adjust the volume of the caller's
voice.
If you receive another call during
f
the current call, a tone will sound
and the second call will be
rejected automatically (this
function is only available if the
connected Bluetooth device
supports it).
To reject the call,
f press the
button 5 .
Robert Bosch Car Multimedia GmbH
Ending a call
To end a phone call,
f press the
button 5 .
"CALL END" appears briefly on the display.
Calling a contact from the phone
book
f Long press the SRC < button.
The first contact in the phone book appears on
the display.
f Press the
or
until the desired contact is displayed.
Note:
Using the
or
jump to the first entry of the next/
previous available initial letter.
f Press the
button 2 to call the
selected contact.
Displaying the Bluetooth name of
the connected device
To display the name of the currently connected
Bluetooth device,
f long press the MENU 5 button.
The name will be shown briefly in the display if
it is shorter than or equal to 8 characters.
Longer names are displayed as scrolling text
once and then the first 8 characters are shown
briefly in the display.
en | 59
6 button repeatedly
6 button you can
Werbung
Inhaltsverzeichnis
