Quick Standby Search - Salora 32KE220 Bedienungsanleitung

Settings>Device Preferences>About menu on the
Home screen. Device name will be one of the shown
Highlight Device name OK. Then highlight
Change OK again. You can either select
To cast your device's screen to the TV screen...
1.
2.
3.
4.
or
1.
2.
3.
To cast an app to the TV screen...
1.
2.
3.
4.
Notes:
Google Cast works on Android and iOS. Make sure that your
mobile device is connected to the same network as your TV.
The menu options and namings for Google Cast function on
change with time. Refer to your device's manual for latest
information on Google Cast function.
HBBTV System
via broadcast with services delivered via broadband
and also enables access to Internet only services
they are signalled by the broadcaster.
cation on that channel. Press the button indicated on
OK Stop Fast forward
buttons on the remote control can be used to interact
Note: You can enable or disable this feature from the TV
Options>Advanced Options>HBBTV Settings menu in
Live TV mode.

Quick Standby Search

every morning while in quick standby mode.
And if the Auto Channel Update
tings> Channel
within 5 minutes after it is switched into quick standby
found channels will be added to the channel list. If the
Software Update
automatically via Internet.
-
Software update via internet
On the Home Screen enter the Settings>Device Pref-
erences>About
system version. Move the focus to the System update
OK. You will be informed about the
-
system status and the time at which the device was last
for update
Note: Do not unplug the power cord during the reboot process.
If the TV fails to come on after the upgrade, unplug, wait for
two minutes then plug it back in.
English - 25 -
Troubleshooting & Tips
-
TV does not switch on
Wait for one minute then reconnect it.
-
Press the Standby/On
TV does not respond to the remote control
-
Rewind
Check if the remote control is working by means of
to be checked.
and needs to be checked.
This method of checking the remote control is not
Set-
No Channels
that the correct network is selected.
Make sure that the correct channel list is selected.
Make sure that you have entered the correct channel
frequency if you have done manual tuning.
No picture / distorted picture
Make sure that the antenna cable is not damaged.
Make sure that the correct device is selected as the
Make sure that the external device or source is
Check
OK if you
resolution and refresh rate.
No sound / poor sound
Make sure that the sound settings are correctly set.
Make sure that the volume is not muted or set to
the balance settings from Sound menu.
Input sources - can not be selected
is dedicated to the connected device.
from the Inputs menu.
English - 26 -