Settings; Network & Internet - Salora 32KE220 Bedienungsanleitung

Record
Record List:
available. Highlight a recording of your choice and
Yellow
button to view detailed information. You can use Red
and Green
Device Info: Connected USB storage devices will
Highlight the device of your choice and
OK
Set TimeShift: Tag the selected USB storage
Set PVR: Tag the selected USB storage device or
Format: Format the selected USB storage
device. Refer to USB Recording section for more
information
Speed Test:
Schedule List: Add reminders or record timers using
the Schedule List menu.
Time Shift Mode: Enable or disable timeshift recording
feature. Refer to USB Recording section for more
information.

Settings

You can access the Settings menu from the Home
Screen or from the TV options
Network & Internet
Connected/Not Connected icon on the Home screen
OK to access this menu.
Wi-Fi:
Available networks
wireless networks will be listed. Highlight See all and
OK
Other options
Add new network:
Scanning always available: You can let the location
OK to turn it on
Wow:
Wol:
Blue
Ethernet
Connected/Not connected:
addresses.
Proxy settings:
IP settings:
Channel
Channels
Channel Installation Mode
selection.
Channel Installation Mode - Antenna
Automatic Channel Search: Start a scan for analogue
and digital channels.
cancel the scan. The channels that have already been
found will be stored in the channel list.
Update Scan: Previously added
channels will be stored in the channel list.
Analogue Manual Scan: Start a manual scan for
analogue channels. Enter the Start Frequency and
then select Scan Up or Scan Down. When a channel
channel will be stored in the channel list.
Single RF Scan: Select the RF Channel by using
the Right/Left directional buttons. Signal Level and
Signal Quality of the selected channel will be shown.
Press OK to start scan on the selected RF channel.
The found channels will be stored in the channel list.
Manual Service Update:
manually.
LCN:
OK
Channel Scan Type:
Channel Store Type:
Favourite Network Select: Select your favourite
one network is available.
Channel Skip:
switching the channels via Programme +/- buttons
on the remote. Highlight the desired channel/s on the
OK to select/unselect.
English - 13 -
Channel Swap:
selected channels in the channel list. Highlight the
to or Default in order to enable this feature.
Channel Move:
another channel. Highlight the channel you want to
OK to select. Then do the same for a
-
of that channel. You should set the LCN
or Default in order to enable this feature.
Channel Edit: Edit channels in the channel list. Edit the
name and channel number of the selected channel and
Network Name Frequency Colour System
-
and Sound System information related to that channel
to delete the highlighted channel.
Analogue Channel Fine-tune: Fine-tune an analogue
Back button to
channel. A list of available analogue channels will be
OK button. Then change the frequency of the
Press OK to store the new frequency for that channel.
Press Back
was analogue.
Clear Channel List:
channel list of the selected channel installation mode.
OK OK
OK to cancel.
Channel Installation Mode - Cable
Automatic Channel Search: Start a scan for analogue
OK. Scan Mode Channel Scan Type Frequency
and Network ID
Mode selections. Set the Scan Mode as Full if you
OK
button to cancel the scan. The channels that have
already been found will be stored in the channel list.
Single RF Scan: Enter the Frequency value. Signal
Level and Signal Quality of the selected Frequency
will be shown. Highlight the Scan
OK to start scan. The found channels will be stored
in the channel list.
LCN:
Channel Scan Type:
Channel Store Type:
OK to select.
Favourite Network Select: Select your favourite net-
network is available.
You should set the LCN
Channel Skip:
switching the channels via Programme +/- buttons
on the remote. Highlight the desired channel/s on the
Channel Swap:
selected channels in the channel list. Highlight the
to or Default in order to enable this feature.
Blue button Channel Move:
another channel. Highlight the channel you want to
of that channel. You should set the LCN
or Default in order to enable this feature.
Channel Edit: Edit channels in the channel list. Edit
the name and channel number of the selected channel
tem Sound System, Modulation and Symbol Rate
Blue button to delete the highlighted channel.
Cancel Analogue Channel Fine-tune: Fine-tune an analogue
channel. A list of available analogue channels will be
OK button. Then change the frequency of the
-
Press OK to store the new frequency for that channel.
Press Back
was analogue.
Scan
Clear Channel List:
channel list of the selected channel installation mode.
Scan
Back
OK
OK to cancel.
Note: Some options may not be available and appear as
grayed out depending on the operator selection and operator
related settings.
Channel Installation Mode
Auto Channel Update
English - 14 -
selected country during the initial
OK to select/unselect.
OK to select.
LCN
OK to select. Then do the same for a
Network Name Frequency Colour Sys-
OK Cancel
Antenna or Cable.