Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
.
10.1 Use:
•
Remove the extension handle.
•
Turn the device to position 2 (Fig. C)
•
Attach a desired nozzle onto the device.
•
Insert the plug into the socket.
•
Check to ensure the nozzle is not blocked
before turning the device on.
•
Set the temperature to setting II.
11 Option 3: BBQ-/Fireplace
lighter
The BBQ and fireplace lighter is always to be
used without the extension handle. Remove the
extension handle by turning the extension han-
dle a quarter turn to the left and pull the exten-
sion handle from the device.
11.1 Use:
•
Attach the BBQ nozzle (10) onto the device
•
Select temperature setting III.
•
Place the nozzle under the coal or the
wood.
•
Ensure that the firelighter is properly
positioned
•
Insert the plug into the socket
•
Check to ensure the nozzle is not blocked
before turning the device on.
•
Remove the device from the coals or the
wood as soon as it starts to glow
•
Now blow hot air into the coals or wood
from a distance of around 5 – 10 cm, until
the coals or wood is burning properly.
•
Doing this will help to avoid damaging the
nozzle attachment. Exposing the nozzle to
high temperatures for a prolonged period of
time could cause the material to melt.
Please follow these instructions to achieve
long-term enjoyment with the product.
•
Switch off the device before removing from
the fire.
Watch Out! To avoid overheating of the BBQ or
Fireplace do not use the device for longer than
necessary.
22
7062788-Batavia-Multiheater-MA-1702-28.indb 22
12 Cooling down
12.1 After each use
1.
Leave device to run for at least one minute
in position I.
2.
Switch off the device.
3.
Pull the plug out of the socket.
4.
Allow the appliance to cool down further.
5.
Remove the accessories.
12.2 Option 1 (weed killer) and 3 (BBQ /
firelighter):
With the aid of the stand (2), it is possible to lay
down the appliance while it is cooling down.
12.3 Option 2 (Paint removal):
Place down without the aid of the stand
13 Cleaning
NOTE! Make sure that the device has com-
pletely cooled down before cleaning and
remove the plug from the socket.
Regularly clean the machine housing with a soft
cloth, preferably after each use. Keep the venti-
lation slots free from dust and dirt. If the dirt
does not come off use a soft cloth moistened
with soapy water. Never use solvents such as
petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
14 Maintenance and Repair
Firstly let the unit run in position I for at least one
minute to lower the temperature to 50 degrees
Celsius.
Disconnect the mains plug from the socket and
allow the appliance to cool down completely!
If possible, clean the appliance after each use.
Use a damp cloth, on stubborn dirt use a brush.
Do not use cleaning agents such as benzine,
alcohol, ammonia, etc. These substances
attack the plastic parts.
15-03-17 10:59
Werbung
Inhaltsverzeichnis
