Starting To Use - Candy 60 COMBI Bedienungsanleitung

All manuals and user guides at all-guides.com
No Description
1 Fridge shelves
2 Crisper Cover
3 Crisper
4 Freezer drawers
5 Adjustable Feet
6 Refrigerator door racks
7 Water tank assembly
No Description
1 Fridge shelves
2 Crispercover
3 Vegetable and fruit crisper
4 Freezing drawers
5 Leveling feet
6 Door balcony
No
1 Light switch
2 Fridge shelves
3 Light
4 Crisper box
5 Crisper box cover
6 Freezer drawers
7 Door balcony

STARTING TO USE

Before you starting to use the freezer, please check
that:
1. The interior is dry and air can circulate
freely at the rear.
2. Clean the interior as recommended
under "TAKE CARE" section (electric
parts of the refrigerator can only be
wiped by dry cloth).
3. Do not switch on until 4 hours after
moving the fridge/freezer. The coolant
fluid needs time to settle. If the
appliance is switched off at any time,
wait 30 minutes before switching back
on to allow the coolant fluid to settle.
4. Before connecting the Refrigerator to
the mains supply position. The
thermostat control dias is located inside
the Fridge compartment.
Turn the thermostat knob to the "3"
5.
position and turn on the electricity. The
compressor and the light inside the
refrigerator will begin to work.
6. Before storing foods in your refrigerator,
turn the refrigerator on and wait for 24
hours, to make sure it is working
properly and to allow the Fridge/Freezer
to fail to the correct temperature.
7. Open the door 30 minutes later, if the
temperature in the refrigerator
decreased obviously, it shows that the
refrigerator system works well. When
Description
30