Rounded Display; Setting Temperature; Internal User Interface - Candy 60 COMBI Bedienungsanleitung

All manuals and user guides at all-guides.com
ROUNDED DISPLAY (if present)
Rounded Display is a touch user interface. When the
refrigerator is turned on, white LED lights will be
enlighted. When the functions is pressed the icon
lights change from white to blue.
SETTING TEMPERATURE: Press MODE icon to change
the temperature
In the models with PURACTION EVO, press the
"MODE" button for 3 seconds to lock and unlock
the display.
-Refrigerator Temperature: Press one time MODE
icon, refrigerator digit blinks, and manage
temperature of refrigerator with "+" and "-" buttons.
-Freezer Temperature: Press two times MODE icon,
freezer digit blinks, and manage temperature of
freezer with "+" and "-" buttons.
PURACTION EVO icon: You can deactivate the
PURACTION EVO function by pressing the
appropriate icon and the PURACTION EVO icon will
be off.
ECO MODE Icon: Press Eco Mode icon to set
temperatures of the fridge in max. energy efficiency
conditions (+5°C for fridge temperature, -18°C for
freezer temperature). The function is activated and
confirmed when the icon LED changes from white to
blue.
If you want to exit the ECO mode function, you need
to press the Eco Mode icon again and the
refrigerator temperature turns back to normal
operation.
SUPER COOLING Icon: Press Super Cooling icon to
start an additional pulse for a fast freezing of the
fridge compartment. The function is activated and
confirmed when the icon LED changes from white to
blue.
If you want to exit the Super Cooling function, you
need to press the Super Cooling icon again and
refrigerator temperature turns back to normal
operation.
LOCK Icon: Press Lock icon to block display user
interface. If the lock function is selected, the icon
(LED) should turn into blue. When Lock function is
turned on the user cannot set any new functions. To
turn off Lock function, the user must perform a long
press on the icon for 3 seconds to unlock display.
SUPER FREEZING Icon: Press Super Freezing icon to
rapidly freeze big quantities of food keeping intact
nutritional food properties. The function is activated
and confirmed when the icon LED changes from
white to blue.
If you want to exit the Super Freezing function, you
need to press the Super Freezing icon again and the
freezer temperature turns back to normal operation.
HOLIDAY Icon: In case of long stops, the Holiday
function can be used. This function deactivates the
fridge compartment, while leaving the freezer on.
Ensure that there is no food inside the fridge
compartment before using this function. The
function is activated and confirmed when the icon
LED changes from white to blue.
If you want to exit the Holiday function, you will need
to press the Holiday icon again, the light in Holiday
goes off and the refrigerator temperature goes back
to the value before Holiday.
WI-FI Icon: This appliance is equipped with SmartFi+
technology that allows you to control it remotely via
App. Press Wi-Fi icon for 3 seconds to activate Wi-Fi
function and the icon light changes from white to
blue.
Machine Enrollment (on App): Download the
SimplyFi App on your device. The Candy SimplyFi App
is available for devices running both Android and iOS,
both for tablets and for smartphones. Get all the
details of the SmartFi+ functions by browsing the
App in DEMO mode.
Open the App, create the user profile and enroll the
appliance following the instructions on the device
display or the "Quick Guide" attached on the
machine. This operation is necessary just for the first
installation. To finalize the enrollment following the
instruction on the smartphone's screen.
Refrigerator usage from remote by App: When the
enrollment is completed, there will be Wi-Fi LED
switched on. From now on it will be possible to
manage the product by using the buttons on the
display or using the App: both of them will be aligned
according to the last command given.
INTERNAL USER INTERFACE (if present)
SET Button: Press SET button for setting the
temperature until you reach the level you want
where level 1 is the warmest and level 4 is the
coldest. Under normal operating conditions, we
recommend using an intermediate setting (level 2).
Once the setting takes effect, it immediately enters
the corresponding stall for operation control, and the
stall indicator lights up 3s3min and then goes out.
Factory default temperature is set to 2.
Long press "SET" key to exceed 3s and enter the
hardware self-check program. The hardware self-
check operation is effective within 10min, and the
long button operation after 10min is invalid.
WI-FI Button: This appliance is equipped with
SmartFi+ technology that allows you to control it
remotely via App. Press Wi-Fi icon for 3 seconds to
activate Wi-Fi function and the icon light changes
from white to blue.
Machine Enrollment (on App): Download the
32