Troubleshooting; Faultcode - Inventum IL010 Gebrauchsanleitung

8

troubleshooting

FAULTCODE

DESCRIPTION
Inadequate water supply.
Water supply is not stopping.
The waste water can not be discharged.
The water temperature is not correct.
Heating defect.
Safety is activated against water
overflow.
Faulty electronics.
CHECK
• Check whether the tap is fully open and there nothing blocking
the
water mains.
• Close the tap, remove the input hose and check whether it is
clogged.
• Start the dishwasher again. Contact the service department of
Inventum when the error remains.
• Close the tap.
• Contact the service department of Inventum.
• The water discharge hose is clogged.
• The filters might be clogged.
• Turn the dishwasher off. Reset the dishwasher's program and
check
the filters and the discharge hose.
Restart the dishwasher.
• Contact the service department of Inventum when the error
remains.
• Contact the service department of Inventum.
• Turn off the dishwasher and close the tap.
• Contact the service department of Inventum.
• Contact the service department of Inventum.
37
English •