Led On Charger; Assembling The Lawn Mower; Assembling The Grass Catcher Box - Stihl RMA 239.1 C Gebrauchsanleitung

7 Assembling the Lawn Mower

6.5

LED on Charger

The LED indicates the operating status of the
charger.
If the LED glows green, the battery is being
charged.
► If the LED flashes red: Rectify the malfunction.
Malfunction in charger.
7 Assembling the Lawn
Mower
7.1 Attaching the Handlebar
► switch the lawn mower off and remove the bat‐
tery.
► Place the lawn mower on a level surface.
► Press sleeve (1) into the bores in upper han‐
dlebar (2).
► Fit spring washers (3) with the convex side
facing inwards onto sleeve (1).
► Guide upper handlebar (2) into handlebar
bracket (4).
► Push bolt (5) through the bores in handlebar
bracket (4) and the sleeve in upper handle‐
bar (2).
► Place nut (6) in the notch in handlebar
bracket (4).
► Tighten bolt (5).
0478-131-9630-B
► Insert cable (7) in guide (8) and press into
holders (9 and 10).
► Fasten cable (7) to the handlebar using cable
clip (11).
The handlebar must not be dismantled again.
7.2 Assembling, Attaching and
Detaching the Grass Catcher
Box
7.2.1

Assembling the Grass Catcher Box

► Fit upper part of grass catcher box (1) onto
lower part of grass catcher box (2).
► Press pins (3) through openings (4) from the
inside.
The pins engage audibly.
► Press upper part of grass catcher box (1)
downwards.
The upper part of the grass catcher box
engages with a click.
7.2.2 Attaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
English
39