Hitachi ECO COMPACT PC-ARCHE Bedienungsanleitung Seite 14

• No gap shall exist between the remote control switch cable and the hole of the remote control
switch case. If there is a gap, cover the gap with vinyl tape. Otherwise, malfunction may occur
due to the entrance of water droplets or insects.
• In case of setting up two or more remote control switches (Main and Subs), follow the contents
of the supplied technical documentation of the indoor units in order to select the appropriate
functions in the main and sub remote control switches. Upon completion of settings, turn off
the power supply of all the indoor units connected to the remote control switches.
4. SWITCH NAMES AND FUNCTIONS
Temperature
Set Indicator
Mode Indicator
Run Indicator
On/Off Button
Operation Mode
Button

NOTE
• The supplementary information about the purchased products is available through the QR
printed in the front cover.
• In case that no access to the website or files are not readable, please contact your Hitachi
dealer or distributor.
• The backlight turns off 30 s after the last operation. If you press any switch, the backlight is
turned on. (The switch pressed to turn on the backlight is not functional.)
• Make sure to press the buttons lightly with your fingertips.
• Do NOT press the buttons or anything with sharp points, such as a ball point pen. This may
damage the controller.
EN
PMML0650 rev.0 - 03/2023 - 1000014300
Fan Speed /
Back Button
Current Time
Fan Speed
Indicator
Directional
Key
Menu Button
4