Operating The Enhanced Clearance Head Piece; Using The Optional Head Support Cushion - Stryker Stretcher Chair Betriebsanleitung

OPERATING THE ENHANCED CLEARANCE HEAD PIECE

To operate the articulating head piece, grasp either handle under the head section and squeeze. Handle (A)
releases one latch and rotates the head piece on axis "A". Handle (B) releases the other latch and rotates
the head section on axis "B". For ease of operation, it is recommended to release only one latch at a time.
WARNING
The weight of the patient's head is resting on the head piece and must be supported by the operator when
the latches are released and the head piece is being positioned. Failure to adequately support the head piece
while positioning the head could result in patient injury.
To avoid possible pinch points when adjusting the head piece, keep your fingers away from the jointed areas.
Do not reach between the side of the head extension and the articulating head piece to pull the release handle.
Finger injury could result.
USING THE OPTIONAL INFLATABLE HEAD SUPPORT CUSHION
B
A
Operation Guide
A
AXIS
AXIS
The optional inflatable head support cushion has two internal air blad-
ders. Squeeze the bulb (A) to inflate the bladders and provide more sta-
bility for the patient's head. Press the release valve (B) to deflate the
bladders.
1−11
B
BOTTOM VIEW